[Free] 2018(June) Ensurepass Microsoft 74-409 Dumps with VCE and PDF 51-60

Ensurepass.com : Ensure you pass the IT Exams
2018 May Microsoft Official New Released 74-409
100% Free Download! 100% Pass Guaranteed!

Server Virtualization with Windows Server Hyper-V and System Center

Question No: 51 HOTSPOT

You plan to implement guest clustering that contains two virtual machines (VMs). You review the following information from one of the VMs:

  • The Validate File System test results in the Failover Clustering Validation Report, as

    shown in the Validation Report exhibit (Click the Exhibit button.)

    Ensurepass 2018 PDF and VCE

  • The Features page of the Add Roles and Features Wizard, as shown in the Features Wizard exhibit (Click the Exhibit button.)

    Ensurepass 2018 PDF and VCE

  • The disk management settings, as shown in the Disk Management exhibit (Click the Exhibit button.)

  • Ensurepass 2018 PDF and VCE

    You need to ensure that you can implement guest clustering.

    For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each correct selection is worth one point.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Ensurepass 2018 PDF and VCE

    C:\Users\Kamran\Desktop\PhotoShare(2).png

    Question No: 52 HOTSPOT

    A company has six physical Windows Server 2012 R2 servers. The servers are configured as shown in the following diagram:

    Ensurepass 2018 PDF and VCE

    Host 1 and Host2 run Windows Server 2012 R2 and have the Hyper-V role installed.

    You need to configure the environment to support shared files that use the VHDX file format.

    Use the drop-down menus to complete each statement based on the information presented in the screenshot. Each correct selection is worth one point.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Ensurepass 2018 PDF and VCE

    C:\Users\Kamran\Desktop\PhotoShare(2).png

    Question No: 53

    You administer a Windows Server 2012 R2 server that has the Hyper-V role installed. You deploy a new virtual machine. You add two virtual network adapters to the virtual machine.

    You need to ensure that the virtual machine maintains network connectivity if one virtual network adapter fails.

    What should you do?

    1. Run the Windows PowerShell cmdlet Enable-VMReplication.

    2. Enable Dynamic Host Configuration Protocol (DHCP) Guard.

    3. Run the Windows PowerShell cmdlet Set-VMHost.

    4. Run the Windows PowerShell cmdlet Set-VMNetworkAdapter.

    Answer: D

    Explanation: Ref: http://technet.microsoft.com/en-us/library/hh848457.aspx

    Question No: 54

    A company has a virtualization infrastructure that consists of two Hyper-V host servers. The host servers and all of the virtual machines (VMs) run Windows Server 2012 R2.

    The company plans to deploy VMs by using file shares that use the Server Message Block (SMB) protocol.

    You need to store the maximum amount of VM data on the SMB file shares.

    Which three file types should you store on the SMB file shares? Each correct answer presents part of the solution.

    1. VM logical unit numbers (LUNs)

    2. VM configuration files

    3. Hyper-V host server logical unit numbers (LUNs)

    4. VM snapshots

    5. VM virtual hard disks (VHDs)

    Answer: B,D,E

    Explanation: A Windows Server 2012 Hyper-V host can now store virtual machine configuration files, VHDs, and snapshots in file shares over the SMB 3.0 protocol.

    Ref: http://technet.microsoft.com/en-us/library/jj134187.aspx

    Question No: 55

    You administer the virtual machines and the Hyper-V host server for a large organization.

    All Hyper-V virtual machines must start even when the host server does not have enough physical memory available.

    You need to ensure that all Hyper-V virtual machines start.

    What should you do?

    1. Configure the Hyper-V host server to use smart paging.

    2. Configure the virtual machines to run at high priority.

    3. Configure the Hyper-V host server to run at high priority.

    4. Configure the virtual machines to use dynamic memory.

    5. Configure the virtual machines as members of an availability set.

    6. Configure the Hyper-V host server as a member of an availability set.

    Answer: A

    Explanation: Ref: http://technet.microsoft.com/de-de/library/hh831766.aspx

    Question No: 56

    A company has Active Directory Domain Services (AD DS) domain controllers that run on Windows Server 2012 R2 servers. There are two forests, and each has a single domain. There is a two-way forest trust between the forests. The company uses Hyper-V for server virtualization. The Hyper-V environment contains the Hyper-V host servers as shown in the following table:

    Ensurepass 2018 PDF and VCE

    You prepare to deploy System Center 2012 R2 Data Protection Manager (DPM) to back up the Hyper-V environment. The deployment must meet the following requirements:

    ->ensure that all Hyper-V servers can be backed up by using DPM

    ->Hyper-V hosts in the perimeter network must use certificate-based authentication

    ->Hyper-V hosts in the internal network must use Kerberos authentication minimize the total number of DPM servers

    You need to deploy DPM to the environment. What should you deploy?

    1. four DPM servers in the internal network and two DPM servers in the perimeter network

    2. two DPM servers in the internal network only

    3. two DPM servers in the internal network and two DPM servers in the perimeter network

    4. two DPM servers in the internal network and one DPM server in the perimeter network

    Answer: D Explanation:

    http://technet.microsoft.com/en-us/library/hh757970.aspx

    Question No: 57

    A company has a Windows Server 2012 R2 server that has the Hyper-V role installed. The server has a single processor and a single 10-gigabit network interface card (NIC). 12 virtual machines (VMs) run on the server.

    You need to configure Hyper-V to allow higher network throughput and reduce processing overhead related to network operations. What should you do?

    1. Run the Windows PowerShell command Set-VMNetworkAdapter -VmqWeight 0 on the VMs.

    2. In Hyper-V Manager, disable the protected network option for all NICs on the VMs.

    3. in Hyper-V Manager, enable the Single Root I/O Virtualization (SR-IOV) option on the VMs.

    4. Disable Internet Protocol security (IPsec) task offloading on the VMs.

    Answer: C

    Explanation: What is SR-IOV

    Requires support in network adapter

    Provides Direct Memory Access to virtual machines Increases network throughput

    Reduces network latency

    Reduces CPU overhead on the Hyper-V server Virtual machine bypasses virtual switch

    Supports Live Migration, even when different SR_IOV adapters are used

    Question No: 58 DRAG DROP

    A company uses System Center 2012 R2 Virtual Machine Manager (VMM) to manage their Hyper-V environment. The VMM environment has two host groups named Dev and Prod.

    The Hyper-V environment has the following requirements:

    ->Administrators of the Prod host group must be able to manage virtual machines (VMs) and perform all VMM administrative tasks only within the Prod host group.

    ->Administrators of the Dev host group must be able to manage VMs and perform all

    VMM administrative tasks only within the Dev host group.

    ->Administrators of the Dev host group must be able to provision new Hyper-V host servers from physical computers for the Dev host group.

    ->The security administrators must be able to add user objects to the Administrator role in VMM.

    ->All delegation must adhere to the principle of least privilege.

    You need to configure the user role profiles for each host group.

    Which user role profiles should you assign? To answer, drag the appropriate user role profile to the correct user group. Each user role profile may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Ensurepass 2018 PDF and VCE

    Explanation:

    Note:

    * Fabric Administrator (Delegated Administrator)

    Members of the Delegated Administrator user role can perform all administrative tasks within their assigned host groups, clouds, and library servers, except for adding XenServer and adding WSUS servers. Delegated Administrators cannot modify VMM settings, and cannot add or remove members of the Administrators user role. http://technet.microsoft.com/en-us/library/gg696971.aspx

    Question No: 59

    You administer three Windows Server 2012 R2 servers named Server1, Server2, and Server3. The servers are configured as follows:

    Ensurepass 2018 PDF and VCE

    Each virtual machine on Server1 has a 50-TB logical unit number (LUN) to store data. There is limited bandwidth between the local data center and Windows Azure.

    You have the following business continuity requirements:

    ->Virtual machines (VMs) on Server1 must be available within 30 minutes of an unexpected failure.

    ->VMs on Server1 must be available if the local datacenter is no longer available.

    You need to configure the environment. What should you do?

    1. Implement live migration from Server1 to Server2.

    2. Configure the VMs to use a checkpoint location on Server3. Then, create a daily snapshot.

    3. Enable Hyper-V replication between Server1 and Server2.

    4. Implement quick storage migration from Server1 to Server2.

    Answer: C

    Explanation: Ref: http://www.petri.co.il/hyper-v-replica-overview.htm

    Question No: 60 HOTSPOT

    A company has a single Active Directory Domain Services (AD DS) domain and four Windows Server 2012 R2 servers that have the Hyper-V role installed. The company uses

    System Center 2012 R2 Virtual Machine Manager (VMM) to manage the Hyper-V environment. One set of Hyper-v host servers is dedicated for use by the development environment. A second set of Hyper-v host servers is dedicated for use by the production environment.

    The network architects assign the IP address subnets as shown in the following table:

    Ensurepass 2018 PDF and VCE

    The network architects also prepare a network design for the Hyper-V environments as shown in the Network Design exhibit. (Click the Exhibit button.)

    Ensurepass 2018 PDF and VCE

    The implementation team reports a problem with IP addressing as shown in the Network Error exhibit. (Click the Exhibit button.)

    Ensurepass 2018 PDF and VCE

    You need to ensure that the implementation team can implement the network design successfully.

    For each of the following statements, select Yes if the statement is true. Otherwise, select No. Each correct selection is worth one point.

    Ensurepass 2018 PDF and VCE

    Answer:

    Ensurepass 2018 PDF and VCE

    Explanation:

    Ensurepass 2018 PDF and VCE

    C:\Users\Kamran\Desktop\PhotoShare(2).png

    Ref: http://blogs.technet.com/b/scvmm/archive/2013/06/17/logical-networks-part-v-network- virtualization.aspx

    http://technet.microsoft.com/en-us/library/jj721570.aspx

    100% Ensurepass Free Download!
    Download Free Demo:74-409 Demo PDF
    100% Ensurepass Free Guaranteed!
    Download 2018 EnsurePass 74-409 Full Exam PDF and VCE

    EnsurePass ExamCollection Testking
    Lowest Price Guarantee Yes No No
    Up-to-Dated Yes No No
    Real Questions Yes No No
    Explanation Yes No No
    PDF VCE Yes No No
    Free VCE Simulator Yes No No
    Instant Download Yes No No

    Leave a Reply

    This site uses Akismet to reduce spam. Learn how your comment data is processed.