[Free] Get all latest Microsoft 70-642 Actual Tests 341-350

EnsurepassQUESTION 341 Your network contains a server named Server1 that runs Windows Server 2008 R2. You configure IPSec on Server1. You need to identify the total number of authentication failures and negotiation failures that occurred on Server1. Which node should you use to achieve this task?   To answer, select the appropriate node in the answer area.   Point and Shoot:   Correct Answer:     QUESTION 342 Your network contains an Active Directory domain. All domain Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 371-380

EnsurepassQUESTION 371 Your network contains a server named Server1. An administrator named Admin1 installs the Windows Server Update Services (WSUS) server role on Server1. You open the Windows Server Update Services console and view the Products and Classifications options as shown in the exhibit.     You need to ensure that you can select updates for Windows Server 2008 R2 Service Pack 1 (SP1) from the Products and Classifications options. What should you do?   A.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 361-370

EnsurepassQUESTION 361 Your company has recently deployed a server that runs Windows Server 2008. The server has the IP information shown below.   IP address 192.168.46.186 Subnet mask: 255.255.255.192 Default gateway: 192.168.46.1   Users on remote subnets report that they are unable to connect to the server. You need to ensure all users are able to connect to the server. What should you do?   A.       Change the IP address to 192.168.46.129. B.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 351-360

EnsurepassQUESTION 351 Your company has a single Active Directory domain. All servers run Windows Server 2008. The company network has servers that perform as Web Servers. All confidential files are located on a server named FSS1. The company security policy states that all confidential data must be transmitted in the most secure manner. When you monitor the network you notice that the confidential files stored on FSS1 server are being transmitted over the network without encryption. You need to Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 331-340

EnsurepassQUESTION 331 Your company contains an active directory domain name contoso.com. The network contains three subnets that they are separated by firewall. The domain has a server named server5 that has active directory lightweight services. Server5 only support encrypted LDAP connection. You need to configure to ensure the client computers can access the LDAP services on server5. Which port should you allow through windows firewall?   A.       TCP 389 B.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 321-330

EnsurepassQUESTION 321 Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack (SP1). All users have laptops that run Windows 7. The users frequently work from network locations that only allow outbound communication to the Internet by using HTTP and HTTPS. You plan to configure Server1 as a VPN server. You need to identify which VPN protocol you should use to ensure that all of the users can establish VPN connections to Server1. Which VPN protocol should you identify? Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 311-320

EnsurepassQUESTION 311 Your network contains a domain controller named DC1. DC1 hosts a zone named fabhkam.com. The properties of the zone are shown in the exhibit.       You need to ensure that only secure dynamic updates are accepted for the fabrikam.com zone. What should you do first?   A.       Configure the zone to be stored in Active Directory. B.       Change the zone to a secondary zone. C.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 301-310

EnsurepassQUESTION 301 Your network contains a server named Server1. An administrator named Admin1 installs the Windows Server Update Services (WSUS) server role on Server1. You open the Windows Server Update Services console and view the Products and Classifications options as shown in the exhibit.     You need to ensure that you can select updates for Windows Server 2008 R2 Service Pack 1 (SP1) from the Products and Classifications options. What should you do?   A.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 291-300

EnsurepassQUESTION 291 Your network contains an Active Directory domain named contoso.com. A partner organization has an Active Directory domain named fabrikam.com. Your company plans to provide VPN access for fabrikam.com users. You need to configure Network Policy Server (NPS) to forward authentication requests to fabrikam.com. What should you configure on the NPS server?   A.       connection request policies B.       system health Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 281-290

EnsurepassQUESTION 281 You network contains an Active Directory forest named Contoso.com. The forest contains two domains named Contoso.com and child.contoso.com. The Contoso.com domain contains a server named Server1. Server1 has the Network Policy and Access Services (NPAS) server role instead. You need to ensure that Server1 can read the dial-in properties of user accounts in the child.contoso.com domain. Which tool should you use?   A.       Netcfg B.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 271-280

EnsurepassQUESTION 271 Your network contains two Active Directory sites named Site1 and Site2. Site1 contains a domain controller named DC1 and a file server named Server1. Site2 contains a file server named Server2. You have a Distributed File System (DFS) namespace named \contoso.comroot that has a namespace server named DC1. On Server1 and Server2, you create a shared folder named Marketing. You need to configure DFS to meet the following requirements:   Ÿ   Ensure that clients Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 261-270

EnsurepassQUESTION 261 Your network contains two servers named Server1 and Server2 that run a Server Core installation of Windows Server 2008 R2. Server1 has the SNMP Service installed. You need to ensure that Server2 can send SNMP traps to Server1. What should you do?   A.       On Server2, run dism /online /enable-feature /featurename:snmp-sc. B.       On Server1, run oclistsnmp-sc. C.       On Server2, Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 251-260

EnsurepassQUESTION 251 You have an application server that runs Windows Server 2008 R2. You need to configure Windows Firewall to allow communications on the server as shown in the following table.     What is the minimum number of firewall rules you should create?   A.        4 B.        2 C.        1 D.        3   Correct Answer: B   Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 241-250

EnsurepassQUESTION 241 Your network contains a server named Server1 that runs Windows Server 2008 R2. The network for Server1 is configured as shown in the table.     You plan to deploy DirectAccess on Server1. You need to configure the network interfaces on Server1 to support DirectAccess. What should you do?   A.       Add the IP address of 10.1.2.2 to LAN1. B.       Remove the IP address of 131.107.1.13 from Internet2, Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 231-240

EnsurepassQUESTION 231 You perform a security audit of a server named DC1. You install the Microsoft Network Monitor 3.0 application on DC1. You plan to capture all the LDAP traffic that comes to and goes from the server between 20:00 and 07:00 the next day and save it to the E:data.cap file. You create a scheduled task. You add a new Start a program action to the task. You need to add the application name and the application arguments to the new action. What should you do?   A.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 221-230

EnsurepassQUESTION 221 You have 10 standalone servers that run Windows Server 2008 R2. You install the Windows Server Update Services (WSUS) server role on a server named Server1. You need to configure all of the servers to receive updates from Server1. What should you do?   A.       Configure the Windows Update settings on each server by using the Control Panel. B.       Run the wuauclt.exe /detectnow command on each server. C.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 211-220

EnsurepassQUESTION 211 Your company has a server named FS1. FS1 hosts the domain-based DFS namespace named \contoso.comdfs. All domain users store their data in subfolders within the DFS namespace. You need to prevent all users, except administrators, from creating new folders or new files at the root of the \contoso.comdfs share. What should you do?   A.       Run the dfscmd.exe \FS1dfs /restore command on FS1. B.       Configure the Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 201-210

EnsurepassQUESTION 201 Your company has a single Active Directory domain. The domain has servers that run Windows Server 2008 R2. You have a server named NAT1 that functions as a NAT server. You need to ensure that administrators can access a server named RDP1 by using Remote Desktop Protocol (RDP). What should you do?   A.       Configure NAT1 to forward port 389 to RDP1. B.       Configure NAT1 to forward port 1432 to RDP1. C.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 191-200

EnsurepassQUESTION 191 Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2 are configured as DNS servers. On Server1, you create a primary DNS zone named contoso.com. You configure Server2 to host a secondary copy of contoso.com. On Server2, you open DNS Manager as shown in the exhibit.     You need to ensure that the contoso.com zone is available on Server2.   A.       From Server2, modify Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 181-190

EnsurepassQUESTION 181 You have a DHCP server named Server1 and an application server named Server2. Both servers run Windows Server 2008 R2. The DHCP server contains one scope. You need to ensure that Server2 always receives the same IP address. Server2 must receive its DNS settings and its WINS settings from DHCP. What should you do?   A.       Create a multicast scope. B.       Assign a static IP address to Server2. C.       Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 171-180

EnsurepassQUESTION 171 You need to document the following configurations of a server that runs Windows Server 2008 R2:   Ÿ   System services Ÿ   Startup programs Ÿ   Hardware configuration Ÿ   Current CPU, network, disk, and memory utilization   Which command should you run?   A.       mrinfo.exe localhost B.       msinfo32.exe C.       perfmon.exe /report Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 161-170

EnsurepassQUESTION 161 Your network contains a Windows Server Update Services (WSUS) server named Server1. Server1 provides updates to client computers in two sites named Site1 and Site2. A WSUS computer group named Group1 is configured for automatic approval. You need to ensure that new client computers in Site2 are automatically added to Group1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)   A.       Create Read more […]

[Free] Get all latest Microsoft 70-642 Actual Tests 151-160

EnsurepassQUESTION 151 Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the File Services role installed. You configure a file classification rule. You discover that scanned documents stored as JPG files are not being classified. You need to ensure that all file classification rules apply to scanned documents. What should you do?   A.       Enable the Windows TIFF IFilter feature. B.       Modify Read more […]