[Free] 2017(Jan) EnsurePass Braindumps Oracle 1z0-878 Dumps with VCE and PDF 141-150

Ensurepass.com : Ensure you pass the IT Exams
2017 Jan Oracle Official New Released 1z0-878
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/1z0-878.html

Oracle Solaris 10 System Administrator Certified Professional Exam, Part II

Question No: 141 – (Topic 2)

A host named client12 is having difficulty communicating with a heavily used server named server14. The server14 server has the ce0, ce1, ce4, and qfe4 interfaces active. The client12, admin6, and appserv5 hosts are all on a private network and access the ce4 interface on server14 exclusively. They cannot access other network interfaces on server14. The appserv5 and admin6 hosts are currently generating heavy traffic to server14 due to a running batch process. Which two commands can you run on server14 to look at the network traffic generated between only client12 and server14 to assist in troubleshooting the communication issue? (Choose two.)

  1. snoop !admin6

  2. snoop -d client12

  3. snoop -d ce server14

  4. snoop -d ce4 client12

  5. snoop -d ce4 client12 server14

  6. snoop -i ce4 server14 client12

Answer: D,E

Question No: 142 – (Topic 2)

An administrator needs to assign the IP address 192.168.3.7 to the interface hme1.

The hme1 interface is currently unused. Which two commands are needed to enable hme1 and assign it the address without rebooting the system, as well as make the configuration persists across reboots? (Choose two.)

  1. ifconfig hme1 plumb 192.168.3.7 up

  2. echo quot;192.168.3.7quot; gt; /etc/hostname.hme1

  3. ifconfig plumb hme1 inet 192.168.3.7 netmask 255.255.255.0 up

  4. echo quot;ifconfig hme1 plumb 192.168.3.7 upquot;gt;gt; /etc/hostname.hme1

Answer: A,B

Question No: 143 – (Topic 2)

Given:

dhcp-100 -gt; dhcp-105 FTP R port=32990 220 dhcp-100 … dhcp-105 -gt; dhcp-100 FTP C port=32990

dhcp-105 -gt; dhcp-100 FTP C port=32990 USER root\\r\\n dhcp-100 -gt; dhcp-105 FTP R port=32990

dhcp-100 -gt; dhcp-105 FTP R port=32990 331 Password require dhcp-105 -gt; dhcp-100 FTP C port=32990

dhcp-105 -gt; dhcp-100 FTP C port=32990 PASS root\\r\\n dhcp-100 -gt; dhcp-105 FTP R port=32990

dhcp-100 -gt; dhcp-105 FTP R port=32990 530 Login incorrect. dhcp-105 -gt; dhcp-100 FTP C port=32990 SYST\\r\\n

Which two statements are true? (Choose two.)

  1. The password for root on dhcp-105 is root.

  2. A user on dhcp-100 cannot log in to dhcp-105.

  3. A user on dhcp-100 successfully logged in to dhcp-105.

  4. A user on dhcp-105 is trying to connect using ftp to dhcp-100.

  5. A user on dhcp-105 is trying to log in to dhcp-100 with root id.

Answer: D,E

Question No: 144 – (Topic 2)

You log on as root and issue the command:

#snoop -a

What are two results of issuing this command? (Choose two.)

  1. Network traffic is displayed.

  2. Only the MAC addresses are displayed.

  3. Packets can be listened to on /dev/audio.

  4. All network traffic is sent to the default log file.

  5. All outgoing packets have the snoop flag appended.

Answer: A,C

Question No: 145 – (Topic 2)

You log in as the root user and issue the command:

# snoop -q -o filename

What are two results of issuing this command? (Choose two.)

  1. Network traffic is displayed.

  2. Packet count is NOT displayed.

  3. Network traffic is sent to filename.

  4. The contents of the filename is in ASCII text.

  5. The snoop command quits after a default amount of time.

Answer: B,C

Question No: 146 – (Topic 2)

You log on as the root user and issue the command:

# snoop -v -i filename

What are two results of issuing this command? (Choose two.)

  1. snoop verifies each packet.

  2. snoop is launched in interactive mode.

  3. snoop displays one line for each packet.

  4. snoop displays multiple lines for each packet.

  5. snoop displays packets from filename instead of the network.

Answer: D,E

Question No: 147 – (Topic 2)

Given:

# svcadm refresh inetd

What does this command do?

  1. It re-reads its configuration data.

  2. It aborts all Internet services and leaves them in a quiescent state.

  3. It stops NFS services in preparation for bringing down the network.

  4. It aborts any RPC services that are listed in the /etc/inetd.conf file.

Answer: A

Question No: 148 – (Topic 2)

Which service is started at boot time, instead of on demand?

  1. ping

  2. walld

  3. telnet

  4. sprayd

  5. mountd

  6. rpcbind

Answer: E

Question No: 149 – (Topic 2)

Given:

# rpcinfo -p |grep rusersd 100002 2 tcp 32776 rusersd

100002 3 tcp 32776 rusersd

100002 2 udp 32786 rusersd

100002 3 udp 32786 rusersd

Which three statements are true? (Choose three.)

  1. rusersd always uses port 100002.

  2. rusersd is registered with rpcbind.

  3. rusersd uses TCP and UDP protocols.

  4. rusersd is currently using ports 32776 and 32786.

  5. The process identifiers (pids) of rusersd are 32776 and 32786.

Answer: B,C,D

Question No: 150 – (Topic 2)

The client-server model describes the communication process between two computers or programs. Which two statements are true about a client in the client server model?

(Choose two.)

  1. A client machine provides no services.

  2. A client process is a standalone process.

  3. A client machine can provide services to other client applications.

  4. A client process runs continuously, awaiting requests from other programs.

  5. The client is a host or process that uses services from another host or program.

Answer: C,E

100% Ensurepass Free Download!
Download Free Demo:1z0-878 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2017 EnsurePass 1z0-878 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.