[Free] 2017(Jan) EnsurePass Braindumps Oracle 1z0-879 Dumps with VCE and PDF 121-130

Ensurepass.com : Ensure you pass the IT Exams
2017 Jan Oracle Official New Released 1z0-879
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/1z0-879.html

Oracle Solaris 10 System

Question No: 121 – (Topic 2)

When modifying the Solaris boot behavior on an x86-based server, the modification can be permanent or temporary. Which describes the procedure used to change the boot behavior temporarily, for a single boot cycle, until the next time that the system is booted?

  1. Edit the bootenv.rc file with the temporary boot command.

  2. Use the kernel command to set the temporary boot command.

  3. Use the eeprom command to set the temporary boot command.

  4. Modify the boot_archive file with the temporary boot command.

  5. Use the bootadm command to set the temporary boot command.

Answer: B

Question No: 122 – (Topic 2)

A SPARC-based system does not boot and displays the message: quot;Timeout waiting for ARP/RARP packetquot;

Which three actions are valid to check the boot environment of the system? (Choose three.)

  1. Check if the frame buffer is working properly.

  2. Check if the NVRAM alias net is set properly.

  3. Check if the NVRAM alias boot-file is set properly.

  4. Check if the PROM variable boot-device is set properly.

  5. Check if the PROM variable local-mac-address is set to true.

Answer: B,D,E

Question No: 123 – (Topic 2)

You have just configured the network interface on systemA. The following information is displayed pertaining to the network interface on systemA:

Ensurepass 2017 PDF and VCE

What is most likely the problem?

  1. The interface is not plumbed.

  2. The interface is not configured.

  3. The interface does not have valid routes configured.

  4. The interface is not marked as UP

Answer: D

Question No: 124 – (Topic 2)

To save time configuring some custom network facilities, a junior administrator in your company attempts to copy some entries from the /etc/inetd.conf file on a Solaris 8 OS server into the /etc/inetd.conf on a Solaris 10 OS server. The junior administrator is unable to determine why services do not start. Which two commands can you run on the Solaris 10 OS server to start the services? (Choose two.)

  1. inetconv -f

  2. inetcfg -i /etc/inetd.conf

  3. inetcfg -o /etc/inetd.conf

  4. inetconv -f -i /etc/inetd.conf

  5. inetconv -forceimport -o /etc/inetd.conf

Answer: A,D

Question No: 125 – (Topic 2)

At boot up, this service calls the startup scripts which are used to configure each network interface with an IP address and other required network information. Which service is it?

  1. svc:/network/service:default

  2. svc:/network/physical:default

  3. svc:/network/ifconfig:default

  4. svc:/network/inetd:default

Answer: B

Question No: 126 – (Topic 2)

You tried connecting to your server using telnet, however, you cannot get a login prompt. From the system console, you display the following information about the telnet service:

Ensurepass 2017 PDF and VCE

Which answer describes what you can do to get the telnet service working again?

  1. Enable telnetd in the /etc/inetd.conf file.

  2. inetadm enable svc:/network/telnet:default

  3. inetadm -a svc:/network/inetd:default

  4. inetadm -a telnet

Answer: D

Question No: 127 – (Topic 2)

You are logged on as the root user and issue the command:

# snoop -v -i filename

What two statements about the effect of the output of this command are true? (Choose two.)

  1. snoop displays packets from filename instead of the network

  2. snoop displays one line for each packet.

  3. snoop displays multiple lines for each packet.

  4. snoop verifies each packet.

  5. snoop is launched in interactive mode.

Answer: A,C

Question No: 128 – (Topic 2)

You need to change the hostname and IP address of a server. Without manually editing all of the required files, which command can be run to restore a system configuration to an unconfigured state, ready to be reconfigured again?restore a system? configuration to an unconfigured state, ready to be reconfigured again?

  1. /usr/sbin/sys-unconfig

  2. /usr/sbin/unconfig

  3. /sbin/ipconfig

  4. /usr/sbin/set_parms initial

Answer: A

Question No: 129 – (Topic 2)

You are creating file systems on an x86-based server that has two IDE disks connected to the primary IDE controller. The master IDE disk is the boot drive, the secondary disk is a 36GB disk drive and contains no data. The secondary drive has one fdisk partition and on that partition, you have created two slices- 0 and 1. You now need to create a file system on slice 1 of the secondary disk. Which device should you select when creating the file system?

  1. c0d0s1

  2. c0d1s1

  3. c1d0s1

  4. c1t1d0s1

  5. c0t0d0s1

Answer: B

Question No: 130 – (Topic 2)

One of your disks is almost full, so you decide to look for files that can be removed. Looking around the file system, you find a directory with this content:

Ensurepass 2017 PDF and VCE

How much disk space can you reclaim by removing these files?

A. 0 bytes

B. 33, 570, 624 bytes

C. 4, 294, 967, 296 bytes

D. 17, 179, 869, 184 bytes

Answer: A

100% Ensurepass Free Download!
Download Free Demo:1z0-879 Demo PDF
100% Ensurepass Free Guaranteed!
Download 2017 EnsurePass 1z0-879 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.