Installation, Storage, and Compute with Windows Server 2016
Question No: 11
You have a server named Server1 that runs Windows Server 2016. Server! is a Hyper-V host that hosts a virtual machine named VM1. Server1 has three network adapter cards That connect to a virtual switch named vSwitch1.
You configure NIC Teaming on VM1 as shown in the exhibit.
You need to ensure that VM1 will retain access to the network if a physical adapter card fails on Server1. What should you do?
From Hyper-V Manager on Server1, modify the settings of VM1.
From Windows PowerShell on Server1, run theSet-VmSwitchcmdlet.
From the properties of the NIC team on VM1, add the adapter named Ethernet to the NIC team.
From the properties of the NIC team on VM1. change the load balancing of the NIC team.
Question No: 12
You deploy a Hyper-V server named Served in an isolated test environment The test environment is prevented from accessing the Internet Server1 runs the Datacenter edition of Windows Server 2016.
You plan to deploy the following guest virtual machines on the server
Which activation model should you use for the virtual machines#39;?
Multiple Activation Key (MAK)
Automatic Virtual Machine Activation (AVMA)
Original Equipment Manufacturer (OEM) key
Key Management Service (KMS)
Question No: 13
In this section, you#39;ll see one or more sets of questions with the same scenario and problem Each question presents a unique solution to the problem, and you must determine whether the solution meets the stated goals Any of the solutions might solve the problem. It is also possible that none of the solutions solve the
Once you answer a question in this section, you will NOT be able to return to it As a result. these questions will not appear in the review screen
Note This question is part of a series of questions that present the same scenario Each question in the series contains a unique solution Determine whether the solution meets the stated goals.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2016 All domain controllers run Windows Server 2012 R2
Contoso com has the following configuration
You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration You need to configure Active Directory to support the planned deployment.
Solution You raise the forest functional level to Windows Server 2012R2. Does this meet the goal?
Question No: 14 HOTSPOT
You have a server named Server1 that runs Windows Server 2016 Server1 is a Hyper-V host
You have two network adapter cards on Server1 that are Remote Direct Memory Access (RDMA) -capable.
You need to aggregate the bandwidth of the network adapter cards for a virtual machine on Server1.
The solution must ensure that the virtual machine can use the RDMA capabilities of the network adapter cards
Which command should you run first? To answer, select the appropriate options in the answer area.
Question No: 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are a server administrator at a company named Contoso, Ltd.
Contoso has a Windows Server 2016 Hyper-V environment configured as shown in the following table.
All of the virtual switches are of the external type.
You need to ensure that you can move virtual machines between the hosts without causing the virtual machines to disconnect from the network.
Solution: You implement a Hyper-V Replica between Host2 and Host4. Does this meet the goal?
Question No: 16
You have four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2016. Each server has a single 4-TB SATA hard disk.
To each server you attach a new 4-TB SATA hard disk.
You need to create a new storage cluster that uses Storage Spaces Direct. The storage pool must contain all of the new disks.
Which command should you run before you enable Storage Space Direct?
Add-ClusterSharedVolume -Name “Disk 1” -Cluster Cluster1
New-Cluster -Name Cluster1 -Node ‘Server1’, ‘Server2’, ‘Server3’, ‘Server4’ – NoStorage
Get-ClusterAvailableDisk -Cluster Cluster1 | Add-ClusterDisk
New-ClusterStorageEnclosure -id 1 -name Cluster1 -type jbod -ConnectionString “Server1,Server2,Server3,Server4”
Question No: 17
Note: This question is part of a series of questions that use the same similar answer choices An answer choice may be correct for more than one question in the series Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question
You have a Hyper-V host named Server1 that runs Windows Server 2016 Server1 has a dynamically expanding virtual hard disk (VHD) file that is 900 GB The VHD contains 400 GB of free space.
You need to reduce the amount of disk space used by the VHD. What should you run?
the Mount-VHD cmdlet
the Diskpart command
the Set-VHD cmdlet
the Set-VM cmdlet
the Set-VMHost cmdlet
the Set-VMProcessor cmdlet
the Install-WindowsFeature cmdlet
the Optimize-VHD cmdlet
Question No: 18 HOTSPOT
You have a machine named VM1 that runs Windows Server 2016 VM1 is a Remote Desktop Services (RDS) server.
You need to ensure that only TCP port 3389 can be used to connect to VM1 over the network.
Which command should you run on the Hyper-V host? To answer, select the appropriate options in the answer area.
Question No: 19 HOTSPOT
You have a server named Server1 that runs Windows Server 2016 and has the Hyper-V server role installed You open Disk Management on Server1 as shown in the following
You plan to configure Disk13 as a pass-through disk for a generation 1 virtual machine
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic
Question No: 20
You have a Windows Server 2016 Hyper-V failover cluster that contains two nodes named Node1 and Node2
On Node1, you create a virtual machine named VM01 by using Hyper-V Manage.
You need to configure VM01 to move to Node2 automatically if Node1 becomes unavailable
What should you do?
From Failover Cluster manager, run the configure Role actions.
From Hyper-V Manager, click VM01 and click Enable Replication.
From Hyper-V Manager Click Node 1 and the modify the hyper-V settings.
From Windows Powershell, run the Enable-VMReplication cmdlet.
Explanation: http://windowsitpro.com/hyper-v/make-vm-highly-available-windows-server- 2012
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|