Implementing Cisco IP Telephony amp; Video, Part 2 v1.0
Question No: 231
When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Explanation: Incorrect answer: ABD
calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character .
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml
Question No: 232
Which bandwidth amounts are correct for configuring locations?
8 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722
8 kb/s for G.729, 64 kb/s for G.711, and 16 kb/s for G.722
64 kb/s for G.729, 64 kb/s for G.711, and 64 kb/s for G.722
8 kb/s for G.729, 8 kb/s for G.711, and 8 kb/s for G.722
Question No: 233
Which three options are overlapping parameters for roaming when a device is configured for
Device Mobility? (Choose three.)
codec E. MRGL F.
Answer: B,C,E Explanation:
The overlapping parameters for roaming-sensitive settings are Media Resource Group List, Location, and Network Locale. The overlapping parameters for the Device Mobility-related settings are Calling Search Space (called Device Mobility Calling Search Space at the device pool), AAR Group, and AAR Calling Search Space. Overlapping parameters configured at the phone have higher priority than settings at the home device pool and lower priority than settings at the roaming device pool.
Question No: 234
Which configuration does Cisco recommend for the peer address on the Expressway-C secure traversal zone when the Expressway-E has one NIC enabled?
Expressway-E internal IP address
Expressway-E external IP address
Expressway-E internal FQDN
Expressway-E external FQDN
Question No: 235
How are Cisco IP Phones directly configured to utilize local route groups?
with Cisco Unified Communications Manager device pools
with Cisco Unified Communications Manager CSS and partitions
with Cisco Unified Communications Manager regions
with Cisco Unified Communications Manager locations
with Cisco Unified Communications Manager AAR
Question No: 236
Which two statements about remote survivability are true? (Choose two.)
SRST supports more Cisco IP Phones than Cisco Unified Communications Manager Express in SRST mode.
Cisco Unified Communications Manager Express in SRST mode supports more Cisco IP Phones than SRST.
MGCP fallback is required for ISDN call preservation.
MGCP fallback functions with SRST.
Question No: 237
Refer to the exhibit.
What media resource should be configured in Cisco Unified Communications Manager?
Cisco Media Termination Point Hardware
Cisco IOS Enhanced Media Termination Point Cisco
Cisco IOS Media Termination Point
Cisco Media Termination Point Hardware (WS-SVC-CMM)
Explanation: Incorrect answer: ACD
Each media termination point receives a list of Cisco Unified Communications Managers, in priority order, to which it should attempt to register. Each media termination point can register with only one Cisco Unified Communications Manager at a time.
Link: http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example0 9186a0080b4f916.shtml
Question No: 238
A voice engineer is enabling video capabilities between H.323 and SIP endpoints. Which component allows for standardized caller addresses between the endpoints?
SIP route pattern
Question No: 239
The Cisco Unified Communications system of a company has five types of devices:
??isco Jabber Desktop
Which two types of devices are affected when an engineer changes the DSCP for TelePresence
Calls service parameter? (Choose two.)
a Cisco Jabber Desktop
Question No: 240
Where do you specify the device mobility group and physical location after they have been configured?
device mobility CSS
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|