Dumps4cert.com : Latest Dumps with PDF and VCE Files
2018 Aug Cisco Official New Released 640-878
100% Free Download! 100% Pass Guaranteed!
Building Cisco Service Provider Next-Generation Networks, Part 2
Question No: 51
Which Cisco platform runs the Cisco IOS XE operating system?
-
Cisco ASR9K
-
Cisco CRS
-
Cisco 12000 GSR
-
Cisco ASR1K
-
Cisco ME 3400
-
Cisco ISR-G2
Answer: D
Explanation: Explanation/Reference: http://www.cisco.com/en/US/prod/collateral/routers/ps9343/product_bulletin_c25- 448387.html
Question No: 52
When upgrading a Cisco ASR 1001 Router, when is the request platform software package expand file bootflash:image-name command required?
-
to copy the consolidated Cisco IOS XE image to the bootflash:
-
to perform Cisco IOS ISSU on the standby route processor
-
to run the router using a consolidated package
-
to run the router using individual subpackages
Answer: D
Explanation: Explanation/Reference: http://www.cisco.com/en/US/docs/routers/asr1000/configuration/guide/chassis/asrswcfg.pdf
Question No: 53
Refer to the partial Cisco IOS router configuration exhibit.
Which statement is true?
-
To support the subinterface configuration, the Fa0/0 main interface configuration is missing the encapsulation dot1Q command.
-
The Fa0/0 interface/subinterfaces are configured correctly to operate as a trunk port to provide inter-VLAN routing for three VLANs (VLANs 1, 2, and 3).
-
To provide inter-VLAN routing, the Fa0/0.1, Fa0/0.2 and Fa0/0.3 subinterface configuration is missing the encapsulation dot1Q vlan-id subinterface configuration command.
-
To provide inter-VLAN routing, the router is missing the vlan 1, vlan 2, and vlan 3 global configuration commands.
Answer: C
Question No: 54
Refer to the exhibit.
What additional configuration is required to enable inter-VLAN routing for VLANs 10 and 20 on the Cisco ME 3400 switch using the Metro IP Access image?
-
interface Fa0/1
ip address 192.168.10.1 255.255.255.0
!
interface Fa0/2
ip address 192.168.20.1 255.255.255.0
!
-
interface Fa0/1
ip address 192.168.10.1 255.255.255.0
!
interface Fa0/2
ip address 192.168.20.1 255.255.255.0
!
router eigrp 1
network 192.168.10.0
network 192.168.20.0
!
-
interface vlan 10
ip address 192.168.10.1 255.255.255.0
!
interface vlan 20
ip address 192.168.20.1 255.255.255.0
!
-
interface Fa0/1 encapsulation dot1q 10
ip address 192.168.10.1 255.255.255.0
!
interface Fa0/2 encapsulation dot1q 20
ip address 192.168.20.1 255.255.255.0
!
Answer: C
Question No: 55 DRAG DROP
Answer:
Question No: 56
Refer to the two show output examples below. The switch with the e8ba.70b5.7180 MAC address is the root bridge for which VLAN or VLANs?
-
VLAN 1
-
VLAN 70
-
VLAN 80
-
VLANs 1, 70, and 80
-
VLANs 1 and 70
-
VLANs 1 and 80
-
VLANs 70 and 80
Answer: C
Question No: 57
On Cisco IOS XR software, which set of commands enables OSPF area 0 on the Gi0/0/0/0 interface that has an IPv4 IP address of 192.168.1.1/24?
-
router ospf 1
network 192.168.1.1 0.0.0.0 area 0
-
router ospf 1
network 192.168.1.1 255.255.255.255 area 0
-
router ospf 1 area 0
interface gi0/0/0/0
-
router ospfv3 1
network 192.168.1.1 0.0.0.0 area 0
-
router ospfv3 1
network 192.168.1.1 255.255.255.255 area 0
-
router ospfv3 1 area 0
network 192.168.1.0
-
router ospfv3 1 area 0
interface gi0/0/0/0
Answer: C
Question No: 58
Which number range is allocated to private Autonomous Systems by the Internet Assigned Numbers Authority?
A. 65535 to 65545
B. 64535 to 64536
C. 64512 to 65535
D. 65535 to 66001
E. 63512 to 64535
Answer: C
Question No: 59
Which two statements about the BGP weight attribute on Cisco routers are true? (Choose two.)
-
It is a well-known discretionary attribute.
-
It is only locally significant.
-
Routes with higher weight are the preferred routes.
-
It is used to influence the inbound traffic from the upstream AS.
-
It is set to 100 by default.
Answer: B,C
Question No: 60
Which configuration error within an AS can cause a Cisco IOS XR router to not announce certain prefixes to its EBGP peers?
-
Some prefixes were mistagged with the no-export BGP community.
-
Some prefixes were set with a MED of 0.
-
The outbound BGP route policy has only set actions that are defined without any pass actions that are defined.
-
The inbound BGP route policy has only set actions that are defined without any pass actions that are defined.
Answer: A
100% Dumps4cert Free Download!
–640-878 PDF
100% Dumps4cert Pass Guaranteed!
–640-878 Dumps
Dumps4cert | ExamCollection | Testking | |
---|---|---|---|
Lowest Price Guarantee | Yes | No | No |
Up-to-Dated | Yes | No | No |
Real Questions | Yes | No | No |
Explanation | Yes | No | No |
PDF VCE | Yes | No | No |
Free VCE Simulator | Yes | No | No |
Instant Download | Yes | No | No |