[Free] 2018(Jan) EnsurePass Testking VMware VCP-510 Dumps with VCE and PDF 201-210

Ensurepass.com : Ensure you pass the IT Exams
2018 Jan VMware Official New Released VCP-510
100% Free Download! 100% Pass Guaranteed!

VMware Certified Professional on vSphere 5

Question No: 201 – (Topic 3)

What are two prerequisites for installing the vCenter Server application? (Choose two.)

  1. The system vCenter Server is installed on must be a physical machine.

  2. A valid vSphere vCenter license must be obtained before installation.

  3. vCenter must be in the same network as the hosts if supporting vSphere Storage Appliance Cluster.

  4. The system vCenter Server is installed on cannot be a domain controller.

Answer: C,D

Question No: 202 – (Topic 3)

What are two valid use cases for vCenter Server Linked Mode? (Choose two.)

  1. An administrator wants to migrate running virtual machines between vCenter Server instances.

  2. An administrator wants to increase the vRAM entitlement pool.

  3. An administrator wants to manage a virtual server environment and a View environment from the same pane of glass.

  4. An administrator wants to search all inventory objects across multiple vCenter Server Virtual Appliance (vCSA) instances from one vSphere Client

Answer: B,C

Question No: 203 – (Topic 3)

An administrator is deploying several ESXi 5.x hosts. Centralized logging with accurate timestamps is a requirement for the deployment. Which two operations ensure these requirements are met? (Choose two.)

  1. Ensure TCP port 123 is not blocked

  2. Configure a syslog server on each host

  3. Configure ensure the hosts have the proper timezone configured

  4. Configure a syslog server on the vSphere Management Appliance

Answer: A,D

Question No: 204 – (Topic 3)

An administrator is setting up vSphere Auto Deploy to deploy 25 ESXi 5.x hosts using the vCenter Server Virtual Appliance (vCSA). What would be considered best practices for Auto Deploy? (Choose three.)

  1. Enable vSphere HA on the cluster.

  2. Protect the vCenter server with Fault Tolerance.

  3. Install the Auto Deploy service on the VCSA.

  4. Include the vmware-fdm VIB in the image profile.

  5. Use PowerCLI to write a rule that assigns a custom image profile to the target hosts.

Answer: A,D,E

Question No: 205 – (Topic 3)

Which tool defines the Image Profiles used with Auto Deploy?

  1. The vSphere PowerCLI add-deployrule cmdlet

  2. The vSphere PowerCLI new-deployrule cmdlet

  3. The vSphere CLI add-deployrule command

  4. The vSphere CLI new-deployrule command

Answer: B

Question No: 206 – (Topic 3)

An administrator plans to deploy ESXi 5.x on a blade server containing no local disks. What boot options are supported for use in place of local disks? (Choose three.)

  1. An SD card

  2. A NIC with iBFT

  3. Auto Deploy

  4. A server with IPMI or iLO

  5. A dedicated NFS share

Answer: A,B,C

Question No: 207 – (Topic 3)

An administrator plans to use an upgrade script to upgrade a number of ESXi 5.x hosts. What options are available for the kickstart file? (Choose two.)

  1. dryrun – Parse and check script but does not install

  2. overwritevmfs – permits overwriting of existing VMFS volumes

  3. vcenter – specifies vCenter Server

  4. autodeploy – defines autodeploy options

Answer: A,B

Question No: 208 – (Topic 3)

An administrator has deployed a vCenter Server to manage a virtual environment.

The administrator has been asked to develop a plan for handling major upgrades to the application.

What should be included in the upgrade plan?

  1. Utilize vCenter Configuration Manager to upgrade the vCenter Server in place

  2. Install a new vCenter Server and import the information from the existing vCenter Server

  3. Install a new vCenter Server over the existing vCenter Server as an in-place upgrade

  4. Utilize Update Manager to upgrade the vCenter Server in place

    Answer: B

    Explanation: Page 131 of vsphere-update-manager-50-install-administration-guide.pdf


    Update Manager 5.0 does not support virtual machine patch baselines.

    If a host is connected to vCenter Server by using an IPv6 address, you cannot scan and remediate virtual machines and virtual appliances that run on the host.

    Remediation of VMware vCenter Server Appliance is not supported. For more information about upgrading the virtual appliance, see the vCenter Server upgrade documentation.

    Page 56 of vsphere-esxi-vcenter-server-50-upgrade-guide.pdf Upgrade the VMware vCenter Server Appliance

    Because the VMware vCenter Server Appliance was first released with vSphere 5.0, upgrading the appliance is not required until a future release. This information helps you plan for future upgrades.


    1. Deploy the new version of the vCenter Server Appliance. The new appliance has a

      default network configuration, and the vCenter Server service is unconfigured and disabled.

    2. Connect to both the old and new appliances in separate browser windows.

    3. In the Upgrade tab of the new appliance, select destination for the appliance role, and click Set role.

    4. In the Upgrade tab of the old appliance, select source for the appliance role, and click Set role.

    5. In each appliance, click Establish Trust. The local appliance key appears.

    6. In the new appliance, copy the local appliance key.

    7. Paste the local appliance key into the Remote appliance key field of the old appliance.

    8. Click Import remote key in the old appliance.

    9. In the old appliance, copy the local appliance key.

    10. Paste the local appliance key into the Remote appliance key field of the new appliance.

    11. Click Import remote key in the new appliance.

    12. In the new appliance, click Import, and click Start import.

The new appliance shuts down the old appliance and assumes the network identity of the old appliance. This process can take several minutes. When the import is complete, the new vCenter Server Appliance starts.

Question No: 209 – (Topic 3)

Which three configuration settings will be migrated when upgrading a host from ESX 4.x Classic to ESXi 5.x? (Choose three.)

  1. The SSH configuration in /etc/ssh

  2. The host configuration in /etc/vmware/esx.conf

  3. The NFS configuration in /etc/fstab

  4. The services information in /etc/services

  5. The licensing information in /etc/licenses/license.conf

Answer: B,C,D

Question No: 210 – (Topic 3)

An administrator is upgrading an ESXi 3.5 host to ESXi 5.x with an intermediate upgrade to

4.0 using Update Manager. The host has a single Intel Xeon processor, 4GB of RAM, and a VMFS datastore on a private, SAN-attached LUN. What might cause the upgrade to be unsuccessful?

  1. The ESXi host has 4GB RAM.

  2. The ESXi host has one processor.

  3. ESXi 3.5 is not supported for upgrade.

  4. Update Manager cannot upgrade a previously upgraded host.

Answer: B

Reference: http://pubs.vmware.com/vsphere- 50/index.jsp?topic=/com.vmware.vsphere.upgrade.doc_50/GUID-AA106086-E10D- 456E-B0B9-340D3D1462C3.html

100% Ensurepass Free Download!
Download Free Demo:VCP-510 Demo PDF
100% Ensurepass Free Guaranteed!
VCP-510 Dumps

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.