Configuring Advanced Windows Server 2012 R2 Services
Question No: 31 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2. All servers have the Hyper-V server role and the Failover Clustering feature installed.
You need to replicate virtual machines from Cluster1 to Cluster2.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
From Hyper-V Manager on a node in Cluster2, create three virtual machines.
From Cluster2, add and configure the Hyper-V Replica Broker role.
From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.
From Cluster1, add and configure the Hyper-V Replica Broker role.
From Hyper-V Manager on a node in Cluster2 modify the Hyper-V settings.
Answer: C,D,E Explanation:
You must configure the Hyper-V Replica Broker for cluster1.
We must configure configure the Replica server to receive replication from primary servers:
->In Hyper-V Manager, clickHyper-V Settingsin theActionspane.
->In theHyper-V Settingsdialog, clickReplication Configuration.
->In the Details pane, selectEnable this computer as a Replica server.
C. Enable virtual machine replication.
Once the hosting server is configured for Replica, you can enable replication for each virtual machine that you want to be replicated.
Reference: Deploy Hyper-V Replica https://technet.microsoft.com/en-us/library/jj134207.aspx
Question No: 32 – (Topic 1)
You have 30 servers that run Windows Server 2012 R2.
All of the servers are backed up daily by using Windows Azure Online Backup.
You need to perform an immediate backup of all the servers to Windows Azure Online Backup.
Which Windows PowerShell cmdlets should you run on each server?
Get-OBPolicy | StartOBBackup
Start-OBRegistration | StartOBBackup
Get-WBPolicy | Start-WBBackup
Get-WBBackupTarget | Start-WBBackup
Answer: A Explanation:
This example starts a backup job using a policy. Windows PowerShell
PS C:\gt; Get-OBPolicy | Start-OBBackup
Not B. Registers the current computer to Windows Azure Backup. Not C. Not using Azure
Not D. Not using Azure
Question No: 33 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DNS
Server server role installed.
Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit. (Click the Exhibit button.)
You need to assign a user named User1 permission to add and delete records from the contoso.com zone only.
What should you do first?
Enable the Advanced view from DNS Manager.
Add User1 to the DnsUpdateProxy group.
Run the New Delegation Wizard.
Configure the zone to be Active Directory-integrated.
Answer: D Explanation:
Secure dynamic updates are only supported or configurable for resource records in zones that are stored in Active Directory Domain Services (AD DS).
Note:To modify security for a resource record
->Open DNS Manager.
->In the console tree, click the applicable zone.
->In the details pane, click the record that you want to view.
->On theActionmenu, clickProperties.
->On theSecuritytab, modify the list of member users or groups that are allowed to securely update the applicable record and reset their permissions as needed.
Reference: Modify Security for a Resource Record
Question No: 34 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2 and has the DHCP Server server role installed.
An administrator installs the IP Address Management (IPAM) Server feature on a server named Server2. The administrator configures IPAM by using Group Policy based provisioning and starts server discovery.
You plan to create Group Policies for IPAM provisioning.
You need to identify which Group Policy object (GPO) name prefix must be used for IPAM Group Policies.
What should you do on Server2?
From Server Manager, review the IPAM overview.
Run the ipamgc.exe tool.
From Task Scheduler, review the IPAM tasks.
Run the Get-IpamConfiguration cmdlet.
Question No: 35 HOTSPOT – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.
Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Both servers connect to the same switch.
Cluster1 hosts a secure web Application named WebApp1. WebApp1 saves user state information in a central database.
You need to ensure that the connections to WebApp1 are distributed evenly between the nodes. The solution must minimize port flooding.
What should you configure? To answer, configure the appropriate affinity and the appropriate mode for Cluster1 in the answer area.
The Affinity parameter is applicable only for the Multiple hosts filtering mode.
/ The Single option specifies that NLB should direct multiple requests from the same client IP address to the same cluster host.
Question No: 36 – (Topic 1)
Your network contains an Active Directory forest named adatum.com. The forest contains a single domain. The domain contains four servers. The servers are configured as shown in the following table.
You need to update the schema to support a domain controller that will run Windows Server 2012 R2.
On which server should you run adprep.exe?
Answer: B Explanation:
We must use the Windows Server 2008 R2 Server.
Upgrade Domain Controllers to Windows Server 2012 R2 and Windows Server 2012
You can use adprep.exe on domain controllers that run 64-bit versions of Windows Server 2008 or Windows Server 2008 R2 to upgrade to Windows Server 2012. You cannot upgrade domain controllers that run Windows Server 2003 or 32-bit versions of Windows Server 2008. To replace them, install domain controllers that run a later version of Windows Server in the domain, and then remove the domain controllers that Windows Server 2003.
Reference: Upgrade Domain Controllers to Windows Server 2012 R2 and Windows Server 2012, Supported in-place upgrade paths.
Question No: 37 HOTSPOT – (Topic 1)
Your network contains an Active Directory forest named contoso.com that contains a single domain. The forest contains three sites named Site1, Site2, and Site3.
Domain controllers run either Windows Server 2008 R2 or Windows Server 2012 R2. Each site contains two domain controllers. Site1 and Site2 contain a global catalog server.
You need to create a new site link between Site1 and Site2. The solution must ensure that the site link supports the replication of all the naming contexts.
From which node should you create the site link?
To answer, select the appropriate node in the answer area.
Create a Site Link To create a site link
->Open Active Directory Sites and Services. To open Active Directory Sites and
Services, clickStart, clickAdministrative Tools, and then clickActive Directory Sites and Services.
To open Active Directory Sites and Services in Windows Server? 2012, clickStart, typedssite.msc.
->In the console tree, right-click the intersite transport protocol that you want the site
link to use.
Use the IP intersite transport unless your network has remote sites where network connectivity is intermittent or end-to-end IP connectivity is not available. Simple Mail Transfer Protocol (SMTP) replication has restrictions that do not apply to IP replication.
Question No: 38 – (Topic 1)
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 contains a virtual machine named VM1 that runs Windows Server 2012 R2.
You fail to start VM1 and you suspect that the boot files on VM1 are corrupt.
On Server1, you attach the virtual hard disk (VHD) of VM1 and you assign the VHD a drive
letter of F.
You need to repair the corrupt boot files on VM1. What should you run?
bcdboot.exe f:\windows /s c:
bcdboot.exe c:\windows /s f:
Answer: D Explanation:
Enables you to quickly set up a system partition, or to repair the boot environment located on the system partition. The system partition is set up by copying a simple set of Boot Configuration Data (BCD) files to an existing empty partition.
Reference: BCDboot Command-Line Options
Question No: 39 HOTSPOT – (Topic 1)
Your network contains an Active Directory domain named contoso.com. All client computers run Windows 8 Enterprise.
You have a remote site that only contains client computers. All of the client computer accounts are located in an organizational unit (OU) named Remote1. A Group Policy object (GPO) named GPO1 is linked to the Remote1 OU.
You need to configure BranchCache for the remote site. Which two settings should you configure in GPO1?
To answer, select the two appropriate settings in the answer area.
BranchCache is disabled by default on client computers. Take the following steps to enable BranchCache on client computers:
Turn on BranchCache.
Enable either Distributed Cache mode or Hosted Cache mode.
Configure the client firewall to enable BranchCache protocols.
Question No: 40 – (Topic 1)
Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 and a member server named Server1. Server1 has the IP Address Management (IPAM) Server feature installed.
On Dc1, you configure Windows Firewall to allow all of the necessary inbound ports for IPAM.
On Server1, you open Server Manager as shown in the exhibit. (Click the Exhibit button.)
You need to ensure that you can use IPAM on Server1 to manage DNS on DC1. What should you do?
Modify the outbound firewall rules on Server1.
Modify the inbound firewall rules on Server1.
Add Server1 to the Remote Management Users group.
Add Server1 to the Event Log Readers group.
Answer: D Explanation:
To access configuration data and server event logs, the IPAM server must be a member of the domain IPAM Users Group (IPAMUG). The IPAM server must also be a member of the Event Log Readers security group.
Note: The computer account of the IPAM server must be a member of the Event Log Readers security group.
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|